Temperature Display
By pressing the switch button on the I/O panel, users can glance at the temperature of the CPU and GPU on the temperature display.
The temperature display can be switched from CPU temperature to GPU temperature or turned off via the switch button.
Attention: The Antec iUnity software must be installed.
4mm Tempered Glass Side Panel
Both side panels adopt tempered glass for better PC showcase visual effects.
Cable Management on Point
2 cable covers are included for beautifying the cable management area.
Storm T3 PWM Fan
3 x Storm T3 140mm PWM Fans at the Front.
1 x Storm T3 120mm PWM Fan at the Rear.
Storm T3 PWM Fan
The Storm T3 Fan of 30mm thickness comes with thicker and longer fan blades, efficiently increasing the air intake.
The PWM function easily reaches the balance between cooling and silence.
Exquisite Steel Mesh
The mesh front panel adopts the 1.2mm vent holes and the magnetic & clip-on design with easy access.
SHOP NOW
OVERVIEW SPECS GALLERY DOWNLOAD
Performance 1 FT
E-ATX HIGHLY COMPATIBLE PC CASE
SYSTEM STATUS WITH A GLANCE
Temperature Display
By pressing the switch button on the I/O panel, users can glance at the temperature of the CPU and GPU on the temperature display.
The temperature display can be switched from CPU temperature to GPU temperature or turned off via the switch button.
Attention: The Antec iUnity software must be installed.
ANTEC iUnity
The Antec iUnity provides instant data on PC specs, loads, and usage.
Download
I/O Panel
Including the mainstream Type-C(10Gbps) port for high-speed transfer
Included dust plugs for dust prevention.
Mic/Audio 2-in-1 port.
PC SHOWCASE
4mm Tempered Glass Side Panel
Both side panels adopt tempered glass for better PC showcase visual effects.
EVERYTHING ORGANIZED
Cable Management on Point
2 cable covers are included for beautifying the cable management area.
There are ten sets of velcro straps for easy cable management.
1
Three sets of velcro straps for fan & I/O cable routing.
2
Five velcro straps for hardware and power supply cables.
3
Two velcro straps at the rear for rear I/O cable routing.
Easy Installation
Removable Top Cooling Bracket.
PRE-INSTALLED 4 FANS OF 30MM THICKNESS
Storm T3 PWM Fan
3 x Storm T3 140mm PWM Fans at the Front.
1 x Storm T3 120mm PWM Fan at the Rear.
COOLING COMPATIBILITY
Storm T3 PWM Fan
The Storm T3 Fan of 30mm thickness comes with thicker and longer fan blades, efficiently increasing the air intake.
The PWM function easily reaches the balance between cooling and silence.
BEST DUST PREVENTION DESIGN
Exquisite Steel Mesh
The mesh front panel adopts the 1.2mm vent holes and the magnetic & clip-on design with easy access.
Best Airflow Path for GPU Cooling
Airflow-enhancing mesh front panel provides massive air.
Ample mesh at the bottom with fans (optional) on the meshed PSU shroud provides the best performance for the GPU cooling
Modular Drive Trays
Supports up to 5 drives: 2 removable drive trays for 3.5" HDD/2.5" SSD & 3 drive trays for 2.5" SSD.
| Design |
|---|
| Maximum PSU length |
44 cm |
| Maximum graphics card length |
40 cm |
| Maximum CPU cooler height |
17.5 cm |
| On/off button |
Yes |
| Reset button |
Yes |
| Cable management |
Yes |
| Anti-dust filter |
Yes |
| Tempered glass panel(s) |
Yes |
| Suitable for |
Gaming |
| Side window |
Yes |
| Number of expansion slots |
8 |
| Number of 2.5" bays |
3 |
| Number of 3.5" bays |
2 |
| Supported motherboard form factors |
ATX, EATX, ITX, micro ATX |
| Product colour |
White |
| Material |
Glass, Plastic, Steel |
| Type |
PC |
| Form factor |
Full Tower |
| Power supply |
|---|
| Power supply location |
Bottom |
| Power supply included |
No |
| Ports & interfaces |
|---|
| Combo headphone/mic port |
Yes |
| USB 3.2 Gen 2 (3.1 Gen 2) Type-C ports quantity |
1 |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity |
2 |
| Cooling |
|---|
| Top radiator sizes supported |
120,140,240,280,360 mm |
| Rear radiator sizes supported |
120 mm |
| Front radiator sizes supported |
120,140,240,280,360,420 mm |
| Liquid cooling capability |
Yes |
| Top fans diameters supported |
120,140 mm |
| Number of top fans supported (max) |
3 |
| Rear fans diameters supported |
120 mm |
| Number of rear fans supported (max) |
1 |
| Rear fans installed |
1x 120 mm |
| Front fans diameters supported |
120,140 mm |
| Number of front fans supported (max) |
3 |
| Front fans installed |
3x 140 mm |
| Storage |
|---|
| HDD/SSD combo cage |
Yes |
| Supported HDD sizes |
2.5,3.5" |
| Weight & dimensions |
|---|
| Weight |
12.6 kg |
| Height |
522 mm |
| Depth |
522 mm |
| Width |
230 mm |
| Packaging data |
|---|
| Package weight |
14.8 kg |
